TARA ASSOCIATES of New England, LLC
Industrial manufacturers' agents
Unit Heaters and Explosion Proof Heaters
|
TARA ASSOCIATES of New England, LLC Industrial manufacturers' agents |
|
|
|
NEW! - LD1 Light Duty Series Electric Unit Heaters RUFFNECK's LD1 Light Duty series of electric forced air unit heaters are suitable for all your light duty heating requirements in non-hazardous environments. The LD1 heaters are CSA and CSAUS approved and are available in models from 3kW to 40kW. Factory installed options and accessories are also available. The LD1 series heater has a 2-year warranty. |
 |
NEW! - CR1 Triton ™ Series Corrosion-Resistant Forced Air Unit Heaters RUFFNECK's CR1 TritonTM series of corrosion-resistant forced air heaters are suitable for non-hazardous highly corrosive, humid or dirty environments and can be used in hose-down applications. The CR1 heaters are rated Type 4X and are available in models from 3kW to 39kW. An optional manual reset high-limit is available for Marine duty use, and MonelŽ elements are also now available. The CR1 series has a 1-year warranty. |
 |
FX4 Series Explosion-Proof Electric Forced-Air Heaters The FX4 series of liquid-filled heaters is CSA certified or UL listed for use in hazardous locations such as oil refineries, petrochemical plants, pulp and paper mills, hazardous waste storage facilities and wastewater treatment plants where explosive gases or dusts are present. The FX4 utilizes a unique evacuated core, which produces a higher air temperature rise, even heat distribution, and a faster warm-up. FX4 heaters range from 2.5 to 35 kW. The FX4 comes standard with 120 volt controls andis available with optional built-in disconnect switch and built-in room thermostat. The FX4 series has a 3-year warranty. |
 |
NEW!-FE1 Series heater with CE ATEX approvals
Explosion-Proof Electric Forced-Air Heaters The FE1 series of liquid-filled heaters is ATEX Approved to directive 94/9/EC (suitable for Ex II 2 G, EEx d IIB T3 hazardous location classifications with an IP55 electrical enclosure rating) and designed to provide space heating in areas where flammable mixtures of air and gases, vapours, or mists are present. The FE1 utilizes a unique evacuated core, which produces a higher air temperature rise, even heat distribution, and a faster warm-up, and is also available with an optional built-in room thermostat. The FE1 series has a 3-year warranty. |
 |
CX1 ProVector® Series Explosion-Proof Electric Convection Heaters The CX1 ProVector® series of convection air heaters are approved for Groups B, C, D, IIA, & ( IIB + H2 ) hazardous locations and are available in 45 models ranging from 1.2 to 7.6 kW. Other features include a small, sloped-top cabinet for better space utilization and improved safety, heavy duty heating elements for longer life and increased reliability, and high-velocity airflow for faster warm-up time and better heat distribution. An optional built-in thermostat is also available, on select models, to minimize field installation costs. The CX1 series has a 1-year warranty. |
 |
NEW!-CF1 ProVectorŽ Series heater with CE ATEX approvals
Explosion-Proof Electric Convection Heaters The CF1 series of convection air heaters is ATEX Approved to directive 94/9/EC (suitable for Ex II 2 G, EEx d IIB T2,T3 or T4 hazardous location classifications with an IP55 electrical enclosure rating) and designed to provide space heating in areas where flammable mixtures of air and gases, vapours, or mists are present. Available in 33 models from 0.75 to 7.6 kW the CF1 heater offers features that include a small, sloped-top cabinet for better space utilization and improved safety, heavy duty heating elements for longer life and increased reliability, and high-velocity airflow for faster warm-up time and better heat distribution. The CF1 series has a 1-year warranty. |
 |
Advanced Horizontal Series Heat-Exchanger Unit Heaters RUFFNECK's Advanced Horizontal heaters are designed for rugged industrial applications and are available in 37 models from 6,000 to 1,200,000 BTU/hr. With a maximum operating pressure and temperature rating of 450 psi and 650°F respectively, the AH Series is perfect for steam, circulating hot water, and glycol heating systems or liquid cooling applications that include: flash stream condensers, lube oil coolers, and pump seal coolers, etc. The AH series has a 1-year warranty. |
 |
Heat-Exchanger Unit Heaters Frost Resistant and High Pressure Unit Heaters This line of RUFFNECK heat-exchanger unit heaters is designed for rugged industrial applications for steam, water or glycol circulating heating systems. The FR (frost resistant) Series is designed primarily for steam applications that are subject to freezing conditions. During an accidental freeze-up, the headers are designed to accommodate ice expansion. The HP (high-pressure) Series is designed for pressures to 400 psi in single-pass and multi-pass configurations. Multi-pass units greatly improve performance with liquids. The HP series and FR series both have a 1-year warranty. |
 |
Thermostats Defender® explosion-proof, heavy-duty thermostats are the smallest, lightest, and most durable thermostats available. They are designed to control heating only, cooling only, or ventilation systems in demanding industrial applications. These include oil refineries, petrochemical plants, pulp and paper mills, coalmines, grain elevators, hazardous waste storage facilities, and other hazardous locations where specific explosive gases or dusts are present. Please visit our Thermostat page for more information. |
 |
Heater Mounting Solutions For mounting systems for Ruffneck heaters, please visit our mounting systems page. |
|
NAVIGATE OUR SITE
|
||
 |
 |
 |
 |
 |
 |
 |
||
 |
 |
 |
|
Frank Raftery
415 Cape Jellison Road Stockton Springs, Maine 04981 Phone 207-567-3111 FAX 207-567-3515 Cell phone 508-274-1401 raftery@tara-associates.com |
Hosting and design by maineweb.com
has become recognized as a serious manufacturer, leading the way in
the industrial heating market. Research and development are of primary
importance to the future of RUFFNECK Heaters. This is evidenced by the
new products we continue to create. We have a simple business philosophy:
concentrate on what we know best, provide the best possible service,
and supply good quality products at competitive prices.